IF YOUR HOT WATER SYSTEM QUITS: IMMEDIATE RESPONSE GUIDE

If Your Hot Water System Quits: Immediate Response Guide

If Your Hot Water System Quits: Immediate Response Guide

Blog Article

Call Us Today

We've unearthed this article on Hot Water Heater Repair down the page on the internet and think it made good sense to relate it with you on my blog.


What Would Cause My Electric Water Heater to Stop Working?
Several modern residences make use of an electrical water heater for their heating system, as a result of its ease and also convenience of use. Nevertheless, just like any other electrical appliances, troubles may emerge with its usage, all of a sudden. It can be really irritating to wake up to a chilly shower instead of a hot one or having your bathroom with water that isn't warm enough and even also hot. Whatever the case may be, hot water heater issues can be rather stressful. Fortunately, we've made a checklist of possible remedies to your hot water heater problems. There are a number of factors that could create many of these troubles, maybe a problem with the power supply, the electrical heating element, or the thermostat. Prior to doing anything, ensure you turn off the main power supply for safety. Whatever the issue is, getting it taken care of ought to not posture excessive of an issue if you adhere to these actions:

Call An Expert:


If after replacing all damaged parts and also resetting your temperature, the water heater still isn't functioning, you might need to contact a professional plumber for an expert viewpoint. The problem with your heating system could be that the hot and cold taps have actually been switched over or it may be undersized for the amount of warm water required in your home. Whatever the case may be, an expert plumber would certainly assist resolve the problem.

Examine Your Power Supply:


As basic as this might appear, it is extremely required. Without appropriate power, your water heater will certainly not function. So the first thing to do when your water suddenly stops working is to verify that it isn't a power trouble. Check if the fuse is blown out or the circuit breaker tripped. If the breaker is the problem, just transform it off and on once again. Change any type of damaged or worn-out fuse. Test the home appliance with power after these modifications to see if it's currently working.

Inspect Your Thermostat:


If your water heater still isn't functioning or the water appearing isn't hot enough, you might require to check the temperature level setups on your upper thermostat. Make sure the breaker is turned off prior to doing anything. Open the access panel and press the red button for temperature reset over the thermostat. This need to assist heat up the water. Transform the breaker back on and examine if the issue has actually been solved.

Examine the Burner in the Water Heater:


If it's not a power trouble, after that attempt having a look at your heating element if it is still working. Check each of your heating elements to ensure the issue isn't with any one of them. If any of them is damaged, change that part and then inspect whether the warm water is back on.

Final thought


Water heater problems are not always significant. Most of them result from minor problems like a blown fuse or worn-out burner. Replacing the damaged parts ought to work. However, if you are still not able to resolve the problem, give a call to your closest plumber ahead to get it repaired.


8 possible reasons why you have no Hot Water


Along with streaming Netflix and having light flood a room when we flick a switch, having hot water flow from our taps and showerheads whenever we want is an oft-overlooked modern miracle of homeownership. That's why, when that flow goes cold, it can be shocking — and not just in a "Wow, that's freezing" kind of way while you're in the shower.


Water Leak


Before hot water reaches your taps and showerheads, it needs to spend some time in your water heater. This appliance, which can be either gas- or electric-powered, takes the cold water that enters your home from your well or utility company and cooks it until it gets hot. It's akin to an electric tea kettle.



Obviously, if your water heater is leaking, it will never fill with water so it won't have anything to warm. To see if this is the case, simply examine the area around the water heater to see if it is wet. If so, you'll likely need to replace the unit, but you can also call in a pro for a second opinion and to see if it is fixable. Sometimes leaks can happen around fixtures on the water heater, and if so, the solution might be as simple as replacing them.


Gas Heater: Gas Leak


If your hot water is fueled by natural gas and there is a leak in the supply line or where the line enters the tank, the appliance won't have the power it needs to heat up your water. The result is not only inconvenient, but it can be extremely dangerous as well. If you smell gas when you investigate your water heater, call your gas utility company immediately and report it as an emergency. It might also be prudent to leave your home until a repair person from the company arrives. Your utility company will usually fix any kind of gas leak. However, in terms of getting your water heater working again, you'll need to relight the pilot and wait a while to see if it is functioning properly. You can call in a water heater specialist or plumber to help with this.


Gas Heater: Pilot Light Problems


There are two other issues with gas-powered water heaters that can lead to a loss of hot water. The first is a pilot light that's blown out. The pilot light is the source of a constant flame inside your water heater. When the heater determines the need to heat up the water it is holding, it will open a valve that will cause gas to flow over the pilot light and cause it to ignite. To see if your pilot light is functioning, there is usually a small window in the front of the water heater. If you can't see a flame, remove the access panel and see if that helps you locate it. If there is still no flame, you'll need to relight it in accordance with the manufacturer's instructions.



Your pilot light should burn with a bright blue flame. If not, make sure there are no drafts affecting it, which could keep it from functioning properly. If the flame looks yellow, it might be a sign of the presence of carbon monoxide, which spells trouble and needs to be looked at right away by a technician.


Gas Heater: Faulty Thermocouple


The second reason why a gas-powered water heater might fail is a faulty thermocouple. This is a small probe that should sit in the pilot light flame. Its purpose is to stop the flow of gas if it senses that the pilot light is out. Sometimes, these probes get knocked off track, so make sure it is directly in the flame. They can also get a buildup on them that prevents their function, so try cleaning yours off with some steel wool or fine-grit sandpaper. If your pilot light won't stay lit and you've tried these steps to fix the thermocouple, it is likely faulty and needs to be replaced. Call a technician.


Electric Heater: Breaker Blues


Electric water heaters don't have pilot lights, because there is no gas to burn in order to heat up the water. Instead, they do their magic through the use of (naturally) electricity. But that's not to say things can't go wrong with them. If your electric water heater isn't working properly, there's a good chance that a breaker was tripped that supplies the appliance power. Check your breaker box and flip any breakers that have switched to the off position back on. If it trips again, then there might be a fault in the water heater, and you'll want to call in a pro to have a look.


Electric Heater: Reaching The Limit


If the breaker is fine, check to see if the high-temperature limit has switched off on the water heater itself. To do so, first turn off the breaker to the unit. Then remove the service panel and press the red button you'll find there. This is the limit switch, and resetting it could solve your problem. To check, replace the panel, turn the breaker back on and listen to see if the water heater is functioning again.


Electric Heater: Heating Element


If these steps don't fix the issue, then you might have a failed heating element, which will need to be replaced. Unless you are comfortable with such repairs, calling in a technician might make the most sense.

https://www.homeserve.com/en-us/blog/home-improvement/no-water-heater/


How to Troubleshoot and Repair an Electric Water Heater

We were shown that editorial on What Would Cause My Electric Water Heater to Stop Working? from a good friend on a different website. Those who enjoyed our blog entry plz do not forget to pass it around. I appreciate reading our article about Hot Water Heater Repair.


Emergency plumber? One call away.

Report this page